Bidirectional hydraulic lock RTHVB0029
- Maximum pressure : 350 bar
- Max. flow rate: 30L/min
- Control ratio: 3:1
- Typical application: Rotary drilling rig
Product Overview
The RTHVB0029 hydraulic lock is typically installed in the large chamber of a rotary drilling cylinder. It offers excellent sealing performance, a large opening ratio, and is energy-efficient and environmentally friendly. This valve is available in a variety of pilot ratios and is typically used as a hydraulic lock in rotary drilling rigs. It ensures that the cylinder does not lose pressure or retract during operation, maintaining stability and reliability.
Technical Parameters
| Technical Parameters | |
| Work pressure | 350bar |
| Rated flow | 30L/min |
| Opening pressure | 6.9bar |
| Pilot ratio | 7:1 |
| Fluid temperature | -20-90℃ |
Working principle and technical features
The RTHVB0029 hydraulic lock consists of two hydraulically controlled check valves, offering excellent locking performance. Normally, oil can flow freely from V1 to C1 or from V2 to C2, while the reverse direction is blocked. When oil is required to flow from C1 to V1, the pressure at V2 pushes the piston’s pressure surface, dislodging the valve core from its seat and enabling reverse flow. To ensure reliable valve closure, pressure must be relieved from ports V1 and V2 to the tank when the directional valve is in the neutral position.
Technical Features:
· Reliable check valve core, hardened and ground valve core components, and ultra-low leakage.
· The valve body is constructed of continuously cast ductile iron, offering excellent wear resistance and long valve life.
