Servo Amplifier: RTSSA2
RTSSA2 servo amplifier is a dedicated amplifier for driving electro-hydraulic servo valves. This amplifier can accept three types of standard signal sources. After conversion and amplification, it can drive most types of nozzle baffle servo valves, jet tube servo valves, and direct-acting servo valves（Included MOOG Servo Valve ）
Features:
- Input signal selectable: ±10mA\±10V\4～20mA
- Output signal optional: ±5mA\±10mA\±20mA\±40mA\±50mA\±100mA\±200mA\±10V
- Output signal positive and negative indication
- Optional flutter signal
- Adopt 35mm DIN rail installation
- Installation method: Mounts directly on 35mm DIN rail
Application
Compatible with signal driving for servo valves across various brands, with exceptional suitability for MOOG series servo valves.
Technical parameter
| Function | Technical parameter | remarks |
| Supply voltage | +24V DC@500mA power. The maximum power supply voltage range is not more than 36V, and the minimum is not lower than 18V | |
| Using temperature | 0°C～ 40°C | |
| Storage Temperature | ‐40°C～85°C | |
| Command input | ±10mA\±10V\4～20mA input | |
| Flutter signal | Frequency 300Hz, ±20%In amplitude adjustable | |
| Servo valve signal output: | ||
| Current output mode: | 5mA@2400 Ω maximum load\ ± 10mA@1200 Ω maximum load\ ± 20mA@600 Ω maximum load\ ± 40mA@300 Ω maximum load\ ± 50mA@240 Ω maximum load\ ± 100mA@120 Ω maximum load\ ± 200mA@60 Ω maximum load\4 ～ 20mA@600 Ω maximum load\ | |
| Voltage output mode | ±10V@1000Ω minimum load\ | |
| Vv LED | Positive voltage output = red Negative voltage output = green | |
| Iv LED | Positive current output = red Negative current output = green | |
| Degree of protection | IP20 | |
| Size | Guide：100（W）×115(H)×25.4(L)mm | |
| Weight | 0.16kg |
Block Diagram
